Use this 3/4-in female hose thread fitting to attach 1/2-in poly tubing to any outdoor water faucet or garden hose
Ergonomically designed to make installation easier and to create a secure fit based on your hand strength
To attach the 1/2-in poly tubing first push the collar back to expose the barb with a built in O-ring
Push and wiggle the 1/2-in poly onto the fitting and under the collar until snug
While holding the tubing with 1 hand turn the ears of the collar in a left counter-clockwise motion to tighten and lock onto the 1/2-in poly tubing
This fitting can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly tubing
(1 Poly Faucet Hose Fitting Per Bag)
RECOMMENDATIONS & LIMITATIONS
When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The timer ( MLWT-1ZONE, MLWT-TWOZONE or MLWT-EGG) must always be the first thing attached to the faucet, then the backflow prevention valve (MLF-31),regulator (MLA-58 or MLD-25PR),filter (MLFF-41), and then the poly hose fitting
If you find it difficult to get the 1/2-in poly tubing onto the fitting, use a little olive oil or vegetable oil by wiping it on the inside of the wall of 1/2-in poly then push onto the fittings
