Search

.5 GPH ADD-A-DRIP-Qty-100 Ct

Part # MLD-AAD-100
$61.82
.5 GPH In-Line Add-A-Dripper -100 Count Bag w/NO Couplers (QTY 100)
+ -

100 Count Bulk Package of 0.5 GPH Add-A-Drippers w/ No Couplers and No Goof Plugs

Use these 0.5 GPH Add-A-Drippers to slowly and gently water window boxes and of flowers, rows of vegetables, potted plants and tree rings

These 0.5 GPH Add-A-Drippers are in-line drippers that drip in the center so that they can be added together using 1/4-in vinyl tubing to make a line of drip

Push the red barb of the dripper into the end of the 1/4-in vinyl, then attach to other end of the vinyl onto the black barb of the dripper

Use the enclosed 1/4-in coupler to attach the 1/4-in vinyl to the 1/2-in poly tubing

Repeat this last step until you have up to 30 of these drippers installed off a single 30-ft line of 1/4-in vinyl from the 1/2-in poly tubing

After the last dripper is installed, turn on the water and allow the flow of water to clean out any debristhat may have entered the line during installation and then put a short 2-in piece of vinyl on the black barb end of the dripper and then use one of our goof plugs (MLA-51G) to end the 1/4-inline

Our 1/4-in support stakes (MLT-DST) can be used to securely hold the 1/4-in vinyl along the row of plants

Also use our 1/4-in tees (MLT-TEE) and elbows (MLT-ELB) to run the 1/4-in vinyl in opposing directionsor in tight corners to supply water to these drippers (100 Count Package Drippers)

(.5 GPH Add-A-Dripper made in Taiwan)

Drippers and Drip Tubing should NEVER be buried underground but can be covered lightly with Mulch

 

RECOMMENDATIONS & LIMITATIONS

When installing any irrigation system it is important to be aware of manufacturer recommendations and potential system limitations.  Please be aware of the following:

A 25 PSI pressure regulator (MLD-25PR) and a faucet filter (MLFF-41) are highly recommendedto be used first at the water sourcewhen using these 0.5 GPH Add-A-Drippers

 

MAXIMUM RUNS

1/4-IN Vinyl Tubing - When installing, you can run tup to 30-ft of 1/4-in Vinyl from the 1/2-in Poly and install up to 30 Drippers in a single line

1/2-in Poly Tubing - Run to to 300-ft of our 1/2-in Poly tubing and connect up to 13 individual 30-ft runs of our 1/4-in Vinyl tubing installing up to 30 of our 0.5GPH Add-A-Drippers per individual run

Minimum operationg pressure for Drippers: 5 PSI

Maximum operating pressure for Drippers: 25 PSI

Product tags
Customers who bought this item also purchased

1/4" support stake (MLT-DST)

1/4-in Vinyl Support Stakes to hold down 1/4-in Vinyl Tubing (QTY 10)
$3.89

1/2" Poly Tee Fitting (MLF-34)

1/2-in Poly Tee Fitting with Locking Collars (QTY 1)
$2.51

1/2" Poly Support Stk. (MLA-57)

Support Stakes for holding 1/2-in Poly Tubing and 1/2-in In-Line Drip Tubing. (Qty 3)
$2.90

150 Mesh Faucet Filter (MLFF-41)

Faucet Filter with 3/4-in Hose Thread for Micro & Drip Irrigation. 150 Mesh. (Qty 1)
$14.42