Search

ADJ. DRIP STK-OLD VERSION-(QTY 3)

Part # MLD-STA-OLD
$4.85
OLD STYLE Adjustable Dripper Stakes W/ Twist Off Couplers-Pack of 3
+ -

Each Dripper Stake is adjustable by turning the top dial to water from 0 to 13 GPH and releasing drops of water up to spraying 8 individual streams of water in 0-3-ft diameter. When increasing the water output, be sure not to over rotate the top, as it can come off and become lost. Replacement caps (MLD-STACAP-OLD) can be purchased separately. (Made in Australia)

Use these adjustable dripper stakes to gently water patio and potted plants, landscapes or gardens

Install by running a piece of 1/4-in vinyl tubing to the plant from the 1/2-in poly tubing using the enclosed 1/4-in barbed coupler.

Use either of our punch tools (MLA-51) or (MLA-TOOL) to snap a hole into the 1/2-in poly tubing to install the 1/4-in barbed coupler that is included in the package.

Push the end of the 1/4-in vinyl onto the side of the 1/4-in barbed inlet of the stake and place near the base of the plant. If you punch a hole in the wrong place or want to relocate the dripper, then simply remove it from the 1/2-in poly and snap in one of our goof plugs (MLA-51G).

Also use our 1/4-in tees (MLT-TEE) and elbows (MLT-ELB ) to run the 1/4-in vinyl in opposing directions or in tight corners to supply water to these drippers. (3 Stakes Per Bag)

RECOMMENDATIONS & LIMITATIONS

When installing any irrigation system, it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:

A 25 Psi Pressure Regulator (MLD-25PR) and faucet filter (MLFF-41) are highly recommended to be used first at the water source when using these adjustable dripper stakes

MAXIMUM RUNS

1/4-in Vinyl Tubing-Run up to 30' of our 1/4-in Vinyl Tubing installing no more than eight (8) Adjustable Dripper Stakes set to drip only. Only 3 Stakes can be used if set to wide open and maximum clicks using 10 GPH and small circle sprays.

1/2-in Poly Tubing-Run up to 300-ft of our 1/2" Poly Tubing installing up to 30 of the Adjustable Dripper Stakes that are wide open to 10 GPH with a small stream spray or run up to 300-ft of our 1/2-in Poly Tubing installing up to 100 of the Adjustable Dripper Stakes with the top open to only use up to 2GPH with water dripping at 25 PSI at the faucet.

Minimum operating pressure for Adjustable Drippers:  5 PSI for Dripping

Maximum operating pressure for Adjustable Drippers:  50 PSI for Dripping

 

Customers who bought this item also purchased

Black 13-in Stake w/ clip (MLS-BLST)

Black 13-in Micro-Stake with Clip for 1/4-in Vinyl.
$0.98

Black Stake Assemb. (MLS-BLA)

Black Landscape Stake Assembly with On/Off Valve and a new 9 to15 GPH Flow Restrictor. Each stake sold separately / Mister NOT included.
$4.34

1/2" Poly Coupling-(QTY 2) (MLF-36)

1/2-in Poly Coupling with Locking Collars. (QTY 2)
$3.62

1/2-in Faucet Hose Fitting-(QTY 1) (MLF-33)

1/2-in Poly Faucet Fitting with 3/4-in hose threads and locking collar (QTY 1)
$2.51