Your birds will never be without water again!
This kit includes 1 18-in bend-n-stay vinyl that locks into the position that you bend it, 1 78-in length of 1/4-in tan vinyl,1 1 GPH PC dripper (MLD-PC1), 1 adjustable dripper (MLD-ADB), 1 1/4-in on/off valve (MLT-BVA), 1 barb x barb coupler (MLT-BXB), and 2 24-in wire ties. Use the wire ties to secure the vinyl to the birdbath.
RECOMMENDATIONS & LIMITATIONS
This kit can be connected directly to your faucet with a 1/4-in faucet adapter (MLA-FAS) or connected to your 1/2-in Poly with a 1/4-in barb x barb coupler (MLT-BXB).
You may also use a Timer (MLWT-1ZONE), (MLWT-TWOZONE), or (MLWT-EGG) to control the amount of water your Birdbath receives. If the Timer is used, it must be the first item attached to the faucet. If the Bird Bath Kit is attached directly from your faucet, we recommend using our 25 PSI Pressure Regulator (MLD-25PR) to bring the water pressure down to a maximum of 25 PSI. Order of installation would be: Timer, 25 PSI Pressure Regulator, then the Faucet Adapter. Then attach the tan vinyl to the adapter and run the vinyl out to your Bird bath and attach a dripper.
