These micro-sprays give a large 360 x14 full circle stream spray pattern and a diameter coverage up to 13-ft to 16-ft
Ideal to use this 360 large circle micro-spray in the center of large landscapes, along hillsides, large trees and performs great in windy conditions
The angle of the spray has a slight upward arc to helps increase the distance of the water pattern to cover large areas
When installed on top of our mister-riser assemblies (MLS-231) or any of our micro-stake assemblies (MLS-211, MLS-TAN, or MLS-BLA) this micro-spray will be flow-controlled to only use 10 GPH
(5 Misters Per Bag)
(Made in the USA)
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system, it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The timer (MLWT-1ZONE, MLWT-TWOZONE or MLWT-EGG) must always be the first thing attached to the faucet, then the pressure regulator (MLA-58), followed by the filter (MLFF-41), and then a poly faucet hose fitting (MLF-33)
When winterizing your system, before the first frost, completely remove the timer and batteries and store inside
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our micro spray stake assemblies (MLS-211, MLS-BLA, MLS-TAN) or mister risers (MLS-231) off one faucet
Attach up to 6 of our micro spray kits (MLK-81, MLK-82T, or MLK-LG) off one faucet
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
