100-Count. These Micro-Spray spinners rotate the water giving a 360 full circle spray pattern with a diameter coverage up to 10-12 ft
Ideal to use this 360 large circle micro-sprinkler in the center of landscapes, flowerbeds, greenhouses, gardens and for large trees
The wing shape makes it easy to thread into the mister-riser assembly or the 1/4-in vinyl and locking collar on top of the micro-stake assembly
When installed on top of our mister-riser assemblies (MLS-231) or any of our micro-stake assemblies (MLS-211), (MLS-TAN), OR (MLS-BLA) this micro spray will be flow-controlled to only use 10GPH
(100 Micro Sprays per Bag)
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system it is important to be aware of manufacturer recommendation and potential system limitations. Please be aware of the following:
The Timer (MLWT-1ZONE), (MLWT-TWOZONE), OR (MLWT-EGG) must always be the first thing attached to the faucet, then the backflow prevention valve, and then the pressure regulator (MLA-58), filter (MLFF-41), and then a poly faucet hose fitting (MLF-33)
When winterizing your system, before the first frost, completely remove the timer and batteries and store inside. You can use our Winterizing Plug (MLA-WHTPLUG) to seal off the 1/2-in poly tubing for winter.
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 30' of our 1/2-in Poly Tubing installing up to 50 of our micro spray stake assemblies (MLS-211), (MLS-BLA), MLS-TAN) or Mister Risers (MLS-231) off one faucet.
Attach up to 6 of our MIcro Spray Kits (MLK-81), (MLK-82T) or (MLK-LG)
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
(Made in the USA)
