This complete kit comes with 30-ft of 1/4-in vinyl tubing (MLT-B30) and everything needed to attach to an outdoor faucet to water 8 potted plants with a micro-spray pot stakes that give a 165° half circle down-spray pattern with up to a 2-ft radius (MLS-POTSTK)
Each of the stakes are adjustable from 0-8 GPH by turning the top on/off valve (MLT-BVA) so you can then supply your plants with a drip of water up to a 165° half circle fan down-spray
Use the 1/4-in vinyl tee fittings (MLT-TEE) to run the vinyl to the 8 micro-spray pot stakes (MLS-POTSTK)
Install by pushing the 1/4-in vinyl end onto the 1/4-in barb inlet on the top of the stake
RECOMMENDATIONS & LIMITATIONS
When installing any irrgation system it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The timer (MLWT-1ZONE, MLWT-TWOZONE or MLWT-EGG) must always be the first thing attached to the faucet, then the backflow prevention valve (MLF-31), pressure regulator (MLD-25PR), filter (MLFF-41), and then the vinyl faucet adapter (MLA-FAS)
MAXIMUM RUNS
Run up to 30-ft of our 1/4-in Vinyl Tubing installing up to 8 of the Micro Spray Pot Stakes
Run up to 300-ft of our 1/2-in Poly Tubing installing up to 65 of our Micro Spray Pot Stakes off one faucet. The first stakes will use up to 6.3 gph and the furthest away stakes at the end of the runs will use approx 4 gph
Minimum operating pressure for Timer: 5 PSI
Maximum operating pressure for Timer: 25 PSI
