100 Count. These Micro-Sprays give a 165° half circle spray pattern with a radius coverage up to 4-ft to 5-ft
Ideal to use this 165° half circle micro-spray to gently water landscape and gardens along fences, walkways, driveways, and the perimeter of the house
This unique 165° 1/2 circle micro-spray has a slightly less than 180° pattern making it ideal to keep spray from drifting onto the house where you water source may cause staining and/or for areas with windy conditions
The wing shape makes it easy to thread into the Mister Riser assembly or the 1/4-in vinyl and locking collar on top of the micro-stake assembly
When installed on top of or our Mister Riser assemblies (MLS-231) or any of our micro-stake assemblies (MLS-211), (MLS-TAN), OR (MLS-BLA) this micro-spray will be flow-controlled to only use 10 GPH
(100 Micro Sprays Per Bag)
(Made in the USA)
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system, it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The Timer (MLWT-1ZONE), (MLWT-TWOZONE) OR (MLWT-EGG) must always be the first thing attached to the faucet, then the Pressure Regulator (MLA-58), followed by the Filter (MLFF-41) and then a Poly Faucet Hose Fitting (MLF-33)
When winterizing your system, before the first frost, completely remove the Timer and batteries and store inside. You can use our Winterizing Plug (MLA-WHTPLUG) to seal off your 1/2-in poly tubing for the winter.
MAXIMUM RUNS
1/2-in Poly Tubing - Run up to 300-ft of our 1/2-in Poly Tubing installing up to 50 of our Micro Spray Stake Assemblies (MLS-211), (MLS-BLA), (MLS-TAN) or Mister Risers (MLS-231) off one faucet
Attach up to 6 of our Micro Spray Kits (MLK-81), or (MLK-82T) or (MLK-LG) off one faucet
Minimum operating pressure for Micro Spray Stake Assemblies: 15 PSI
Maximum operating pressure for Micro Spray Stake Assemblies: 50 PSI
